Handle replaced on the Oceanair Roller Blinds Skyscreen in our stateroom - 2018

Our Oceanair Skyscreen in our stateroom over our bed
had a broken handle on the screen side.

January 2018 - Tied up in the El Cid Marina Mazatlán, Mexico

 This made it difficult to separate the blackout shade from the screen. Also the screen spring had lost some of its tension it seems so the black-out shade would not close all the way. The other three we have on the big hatches were not effected. 
 The parts of the handle that were left.
 Here is the new handle that we put on. It took a couple of calls to tech support to figure this all out. It has been quite a while since we installed these Oceanair Roller Blinds Skyscreens.  We also rolled the spring up for shade, making it tight again. This all took a while but is well worth it 😴 
 Oceanair Roller Blinds Skyscreen with screen part way out before we re-installed it.
You can see one of the Newfound Metals port holes with the cover Debbie made for them on it.
With the covers and the Oceanair Skyscreen blackout shades we can make our stateroom really dark even at noon time!   Also on our Newfound Metals port holes are Zarcor Peek-a-boo Blinds which I think have been re-named to CloZures.

3 comments:

  1. Can you tell me were I can get the handles I live in australia

    ReplyDelete
  2. Did you have to remove the sky screen from the hatch to install the new handle?

    ReplyDelete